|
• |
Pre-drill and
counter sink for screw head
size. |
|
• |
Use quality stainless steel,
trim head deck screws, #8 x
21/2" or #9 x 21/2". |
|
• |
We recommended GRK #9 x 21/2"
RT. |
|
• |
Headcote® offers #8 x
21/2" trim head screws
that are color matched to all
CorrectDeck colors. |
|
• |
Side to side gapping should
be at least 1/8”. Please
refer to our spacing calculator
for proper end to end gapping. |
|
• |
CorrectDeck Classic boards
can also be used as the starter
boards when installing the Channeled
decking, giving a finished,
rounded edge.
|
• |
CorrectDeck is very hard.
That makes it durable. The trade-off
is, it can be a bit more difficult
to fasten. Our Classic profile
must be screwed down using two
fasteners at each joist. To
install, we recommend you pre-drill
before using high-quality, stainless
steel, trim head decking screws
(do NOT use galvanized). Use
two drills or a quick-change
drill and driver set to make
the job quicker.
|
