|
Return to
Top
Will the surface peel off?
No, our fusing process incorporates
the surface layer into the wood fiber
continuously as one phase. In testing
by an independent lab, the surface
layer will not peel off even when
scored or scratched.
Return to
Top
Why can’t I see a distinct layer?
Rather than being a specific ‘layer’,
our patented technology actually brings
more of the UV, stain resistance,
and mildew-resistance additives to
the surface. This is continuously
blended into the material. That is
why scratching and hardness is not
a concern. Several companies that
specialize in testing the thickness
of coextrusion layers have not been
able to detect a distinct boundary
between the wood composite substrate
and the cap layer.
Return to
Top
How come the factory saw cut is chipped?
This happens because the product is
hot when we cut it at the factory
and our saws cut up from underneath
(this also happens on our standard
material). You can trim the ends if
you like (all of our decking is cut
at least 1” longer than nominal
to provide for trim stock). When cut
at the jobsite, the product will not
chip in this way because it has had
a chance to cool down. Consider cutting
it upside down using a sharp carbide
blade for the cleanest cut.
Return
to Top
What is the cap layer made of?
It is made of a proprietary blend
of scratch, stain, and antimicrobial
additives with and anti-slip grit
incorporated into our super-hard Polypropylene
base.
Return
to Top
What happens if the cap layer is scratched
through and shows the substrate?
This is no cause for alarm. The substrate
contains all of the necessary UV stabilizers
and is unaffected.
Return to
Top
Will the surface ever wear off?
Under normal conditions, the surface
will last indefinitely. If exposed
to high wear or abrasion, some wearing
is possible. If any of the substrate
becomes exposed, this is no cause
for alarm. It contains the same UV
stabilizers as the rest of the composition
and is not affected.
Return to
Top
Why did you develop CorrectDeck CX?
In listening to the decking marketplace,
we learned that there has been a value
gap between what people expect of
a composite decking product and what
is available. We saw a need for a
truly low maintenance deck product,
with all of the benefits of composite
decking but none of the drawbacks
(drawbacks like significant color
fade, grease staining, and mildew).
This product is the only one on the
market which solves the four composite
decking customers complain about most:
color fade, grease staining, and mildew
resistance.
Return to
Top
How long will the antimicrobial last?
As you can probably understand, we
can’t predict exactly because
every exposure is different. The important
thing to remember is the additive
is incorporated into CorrectDeck CX
in the manufacturing process, not
painted or dipped. So it will not
soak back out, and it creates a reservoir
of antimicrobial additive that will
replenish the surface over time. You
can expect the antimicrobial additive
to inhibit the growth of many types
of mold & mildew for five years
or more. After five years, the product
still has a much reduced tendency
to stain or spot from mold & mildew,
since there is little or no exposed
wood fiber.
Return to
Top
Is the antimicrobial safe for children?
Yes, when used in accordance with
our instructions. The additive used
in CorrectDeck CX with Microban is
the same as that commonly used in
antimicrobial hand soap or dandruff
shampoo. The MSDS is the same as that
of standard CorrectDeck.
Return to
Top
How do I match a cut edge to the coated
edge?
Use classic squareedge profile to
match up or for ripping. If necessary,
use our touch up markers.
Use our CorrectDeck
CX Classic profile to match up or
for ripping. If necessary, use our
touch up markers. . And try our Channeled
router bit along one edge of classic,
for picture framing.
Return to
Top
Is it slippery?
CorrectDeck CX contains a grit additive
for traction control. It is not slippery
under normal conditions and is ADA
compliant.
Return to
Top
Can I power wash it?
Yes, at low pressure (below 1200 psi)
but it will not normally be necessary
- a garden hose will remove most stains
and dirt.
Return to
Top
Can I use bleach?
Bleach is not recommended and not
normally necessary. Simply use laundry
soap and water to clean.
Return to
Top
Can I stain or paint it?
No.
|
